Each site plan submitted shall be at a scale of one inch equals 50 feet. All plans shall be prepared by a licensed architect or engineer, including accurate lot lines certified by a licensed engineer or land surveyor, submitted on one of four of the following standard sheet sizes: eight and one-half by thirteen (8 1/2 x 13) inches; thirty by forty-two (30 x 42) inches; twenty-four by thirty-six (24 x 36) inches; or fifteen by twenty-one (15 x 21) inches, and including the following data: (If one sheet is not sufficient to contain the entire territory, the map may be divided into sections to be shown on separate sheets of equal sizes, with references on each sheet to the adjoining sheets) name of the development and boundaries of the tract; north arrow; scale; date; tax map lot and block numbers; zone; existing and proposed streets and street names; contour lines at two foot intervals in and within 100 feet of any paved portion of the tract; existing and proposed streams and easements; total acreage to one one-hundredth (1/100) of an acre; total building coverage in acres and percent of lot; total number of parking spaces; all dimensions that are needed to confirm conformity with the zoning ordinance, such as but not limited to, buildings, lot lines, setbacks, parking spaces and yard areas; a small key map giving the general location of the parcel to the remainder of the municipality; and the site in relation to all remaining lands in the applicant's ownership; location showing adjacent property ownership; location showing adjacent property owners and surrounding properties within a distance of 200 feet of the applicant's property; and the names and addresses of the owner and developer of the property as well as the name, address and title of the person or persons preparing the plan.