§113-38.6 Final Subdivision Approval
| |||||||
Additional items and details required for the Submission of Final Subdivision Applications shall include all requirements for applications for preliminary approval as well as the following: | |||||||
A. A total of eighteen (18) copies of all subdivision application documents and plans are required. Initial submission shall consist of a total of five (5) copies of all plans and application forms. Once an application is deemed complete, in compliance with the Municipal Land Use Law, an additional thirteen (13) copies of all plans and application forms shall be submitted prior to scheduling the public hearing on the application. All plans shall be folded to a size not to exceed 10" by 14". The final plat shall be drawn in ink on mylar at a scale not smaller than one (1) inch equals fifty (50) feet and in compliance with all the requirements of the New Jersey Map Filing Law and for filing a map with the County Recording Officer and shall be designed in compliance with the provisions of this chapter. The final plat shall be accompanied by the same information required for preliminary approval in addition to the following:
| |||||||
(1) Each block and lot shall be numbered in conformity to existing tax map procedures.
| |||||||
(2) The building address number for each proposed building lot of the subdivision in accordance with existing Borough building address numbering requirements and regulations based on the width of lots of the subdivision as required by the Zoning Ordinance of the Borough.
| |||||||
(3) Bearings and distances of all lot lines, and radii, are distances and central angles of all curves. All distances shall be calculated and shown to the nearest one hundredth of a foot.
| |||||||
(4) Proposed final contours at two (2) foot intervals extending to twenty-five (25) feet beyond the boundary of the subdivision. Existing contours at five (5) foot intervals must be shown extending twenty-five (25) feet beyond the boundary of the subdivision.
| |||||||
(5) Certification that the applicant is agent or owner of the land, or that the owner has given consent under an option agreement for the dedication of streets, alleys, easements and other rights-of-way and any lands for public use.
| |||||||
(6) At least one (1) corner shall be tied into a U.S.G.S. benchmark. The reference meridian (north arrow) shall be identified as true or magnetic. Monuments, lot corners and other survey points shall be located and described.
| |||||||
(7) When approval of plat is required by an officer or body of the County or State, approval shall be certified on the plat.
| |||||||